Generic
IC 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
8-BIt Serial-in, Parallel-Out Shift
Wide Operating Voltage Range of 2 V to 6 V
High-Current 3-State Outputs Can Drive Up To 15 LSTTL Loads
Low Power Consumption, 80-UA Max icc
Typical tpd =…
SKU: 241498
Product Code: 74HC595-DIP-16
£0.60
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
From:
£0.99
256MB DDR Ram PC3200/400
400MHz PC3200
Double Data Rate (DDR)
SKU: 227717
Product Code: DDR-PC3200-256
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
£1.19
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
£3.59
ATMEL ATMEGA88PA-PU MCU 8BIT 8KB FLASH DIP 28 Pin
Product Details
ADC Channels
6
ADC Resolution
10bit
ADCs
6 x 10 bit
Data Bus Width
8bit
…
SKU: 242391
Product Code: ATMEGA88PA-PU
£3.59
PP3 Battery Box - with 15cm leads
Description
Our high quality plastic PP3 battery box is great for any project needing easily changeable 9V power.
The robust plastic construction protects the battery once it has been inserted, and …
SKU: 238212
Product Code: PP3 Battery Box
£3.59
3.5inch To 5.25inch Hard Drive Mounting Converter
Description
MOUNTING RAILS
SKU: 227338
Product Code: SHKIT
£3.59
2 X USB Ports - 2 X 5Pin Connector
Description
2 Port USB main board receptable [2 x USB external ports to 1 x 10pin Motherboard connector]
SKU: 227254
Product Code: COUSB0100
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
£4.79
Solderless Breadboard Power Supply - 3.3V and 5V - DC Jack and USB connector, the easy way to get power to your breadboard
Description
Please note: Breadboard is not included.
This ingenious Solderless Breadboard Power Supply slots into the power rails of our MB-102 breadboard and can provide independent 5V and 3.3V pow…
SKU: 234314
Product Code: BREADBOARD-PSU
£5.99