Generic
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
£1.19
MAX232EPE MAX232N MAX232 RS232 5V RS-232 Dual Transmitters/Receivers DIP 16 Pin
RS-232 Dual Transmitters/Receivers, Maxim Integrated Products
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface.
M…
SKU: 242392
Product Code: MAX232
£1.19
Fan Screws (Pack Of 4)
Standard short screws for mounting case fans or attaching fan guards. 4.9 x 10.5mm.
SKU: 227851
Product Code: FAN/SCREWS
£2.39
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
From:
£3.48
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
£3.59
3.5inch To 5.25inch Hard Drive Mounting Converter
Description
MOUNTING RAILS
SKU: 227338
Product Code: SHKIT
£3.59
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
£3.59
10 to 6 Pin Adapter for ATMEL AVRISP USBASP
Description
For the AVRISP USBASP STK500 programmer standard interface to standard 6PIN 10PIN Interface Converter
AVR MCU development board can be used to download interface converter
The ISP interfa…
SKU: 241480
Product Code: 10-6/PIN
£3.59
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
£4.79
2 X USB Ports - 2 X 5Pin Connector
Description
2 Port USB main board receptable [2 x USB external ports to 1 x 10pin Motherboard connector]
SKU: 227254
Product Code: COUSB0100
£4.79