Show All /
Development/Breakout Boards (36)
1-WIRE (1)Generic
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock 
£1.19
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock
£4.79
USB ISP Programmer for ATMEL ATMega ATTiny 51 AVR SMC Board USBASP Programmer
The USBasp AVR programmer is a USB in-circuit programmer for Atmel AVR microcontrollers.
Features include:
Allows you to read and write the controller's EEPROM, firmware, fuse bits and lock bits
…
SKU: 240898
Product Code: USB-AVR
Availability: In Stock
£5.99
HC-SR501 Passive IR PIR Sensor
This is an easy, simple to use Passive IR sensor - it only needs a single I/O pin on a microcontroller.
Working voltage: 5V to 20V
Output: High: 3.3V, Low: 0V
Detection angle: Approxima…
SKU: 235914
Product Code: HC-SR501
Availability: In Stock
£5.99
SD Secure Digital Storage Shield Module Board Card Memory SPI Interface
Description
Description
This breakout board allows you to connect SD cards to a microcontroller! Smaller cards such as microSD cards can be connected with an adapter (not supplied). This breakout bo…
SKU: 233004
Product Code: SD/BREAKOUT
Availability: In Stock
£5.99
Solderless Breadboard Power Supply - 3.3V and 5V - DC Jack and USB connector, the easy way to get power to your breadboard
Description
Please note: Breadboard is not included.
This ingenious Solderless Breadboard Power Supply slots into the power rails of our MB-102 breadboard and can provide independent 5V and 3.3V pow…
SKU: 234314
Product Code: BREADBOARD-PSU
Availability: In Stock
£5.99
Digispark ATTINY85 Arduino General Purpose Micro USB Development Board
Mini USB Micro Development Board
- Condition: New
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source - 5v or 7-16v (automatic selection)
- On-board 150ma 5V Regu…
SKU: 242375
Product Code: ATTINY85
Availability: In Stock
£5.99
