Show All /
Development/Breakout Boards (36)
1-WIRE (1)Generic
Light Dependent Resistor LDR
Description
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease i…
SKU: 236248
Product Code: LDR
Availability: In Stock 
£0.60
SMD Surface Mount 1206 Series Resistors
The 1206 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors can be…
SKU: 237975
Product Code: RESISTOR/SMD/1206
Availability: In Stock
From:
£0.99
SMD Surface Mount 0805 Series Resistors
The 0805 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors ca…
SKU: 233942
Product Code: RESISTOR/SMD/0805
Availability: In Stock
From:
£0.99
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock
£1.19
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
Availability: In Stock
From:
£1.49
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
Availability: In Stock
£3.59
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock
£4.79
Resistors for use with LEDs - 3.3V, 5V, 6V, 9V, 12V - 100 pack
These high quality resistors are suitable for use with LEDs - simply choose the voltage you want to power your LED from and the correct resistors will be supplied.
The resistors supplied are based …
SKU: 238041
Product Code: LED Resistors
Availability: In Stock
£4.99
