In stock only 
Development/Breakout Boards (36)
1-WIRE (1)Generic
RJ45 Cat5E Solid Core Patch Cable Grey (Per Metre)
Description
RJ45 Solid Core Patch Cable
SKU: 227654
Product Code: CONET305S
Availability: In Stock 
£0.23
RJ45 Cat5E Multi Core Patch Cable Grey (Per Metre)
Description
Patch Cable
SKU: 227652
Product Code: CPEUTP5M
Availability: In Stock
£0.35
Light Dependent Resistor LDR
Description
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease i…
SKU: 236248
Product Code: LDR
Availability: In Stock
£0.60
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
Availability: In Stock
From:
£0.99
SMD Surface Mount 1206 Series Resistors
The 1206 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors can be…
SKU: 237975
Product Code: RESISTOR/SMD/1206
Availability: In Stock
From:
£0.99
SMD Surface Mount 0805 Series Resistors
The 0805 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors ca…
SKU: 233942
Product Code: RESISTOR/SMD/0805
Availability: In Stock
From:
£0.99
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
Availability: In Stock
£1.19
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
Availability: In Stock
From:
£1.49
RJ45 Male To Female Crossover Cable Convertor
Convert a standard network cable to a crossed cable with this adapter
SKU: 227281
Product Code: CONETR017
Availability: In Stock
£1.80
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
PP3 Battery Box - with 15cm leads
Description
Our high quality plastic PP3 battery box is great for any project needing easily changeable 9V power.
The robust plastic construction protects the battery once it has been inserted, and …
SKU: 238212
Product Code: PP3 Battery Box
Availability: In Stock
£3.59
