Show All /
Development/Breakout Boards (36)
1-WIRE (1)Generic
Light Dependent Resistor LDR
Description
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease i…
SKU: 236248
Product Code: LDR
Availability: In Stock 
£0.60
A3144 A3144E Y3144 44E/938 Hall Effect Switch - Various Pack Sizes Available to save you money !
The Hall Effect switch is a high sensitivity hall-effect switch designed for high temperature operation - up to 150°C.
The unipolar switching characteristic makes these devices ideal for use with a s…
SKU: 232989
Product Code: SWITCH/HALLEFFECT/A3144
Availability: In Stock
From:
£0.99
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock
£1.19
15mm Piezo Elements Sounder Sensor
This Product is commonly used in a wide variety of musical instruments like guitars and drum kits
Piezo elements come in handy when you need to detect vibration or a knock. You can use these for ta…
SKU: 242405
Product Code: PIEZO-15MM
Availability: In Stock
£1.19
27mm Piezo Elements Sounder Sensor
This Product is commonly used in a wide variety of musical instruments like guitars and drum kits
Piezo elements come in handy when you need to detect vibration or a knock. You can use these for ta…
SKU: 244523
Product Code: 27-PIEZO
Availability: In Stock
From:
£1.19
TCRT5000 TCRT5000L Reflective Sensor Optical Transceiver PCB Mount
Feature:
Compact construction, sense the presence of an object by using the reflective IR beam from the object
Consist of a phototransistor
Snap-in construction for PCB mounting
Plastic po…
SKU: 241426
Product Code: TCRT5000
Availability: In Stock
From:
£1.49
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
Availability: In Stock
From:
£1.49
13.56MHZ 1K S50 NFC Tag PVC Waterproof Adhesive Label Mifare Smart RFID
NFC Tags
1. Operating Frequency: 13.56 MHz.
2. Label Type: Mifare 1k S50 MF1.
3. Capacity: 1024 bytes EEPROM. (768 free bytes available)
4. Rewritable Capability: > 100,000 times.
…
SKU: 244524
Product Code: 3M-TAG
Availability: Out of Stock
From:
£1.99
KY-040 Rotary Encoder Module Sensor
Rotary encoder module 360 module coding Module
Note: This module does not provide technical support
Operating voltage: 5V
Circle pulses: 20
Rotary encoder can count positive by rotation
And rever…
SKU: 242369
Product Code: KY-040
Availability: In Stock
£2.39
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
Availability: In Stock
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
