In stock only 
Development/Breakout Boards (36)
1-WIRE (1)Generic
DHT11 Humidity and Temperature Sensor
The DHT11 is a basic, low-cost digital thermometer and humidity sensor that is ideal for use with PICs, Arduinos and other microcontrollers.
3V to 5.5V Power and I/O
2.5mA maximum current draw…
SKU: 235958
Product Code: DHT11
Availability: In Stock 
£3.59
75cm SATA Cable With Right Angle Connector To Straight Connector
SKU: 227285
Product Code: SATA/75CM/R
Availability: In Stock
£4.20
3pin To 4pin Molex Case Fan Adapter Converter
Description
Connects a high powered three pin fan to a four pin power supply connector with a separate three pin connector for the RPM signal. Great for retaining RPM monitoring capabilities on high …
SKU: 227848
Product Code: FANCASE3P-4PCONV
Availability: In Stock
£4.79
4 Pin Motherboard Power Extension
4pin 12V ATX plug - 4pin ATX jack
Designed to extend the 4 pin 12V power supply between the mains adaptor and the motherboard
Uses high quality components
SKU: 227191
Product Code: 4PIN-4PINEXT
Availability: In Stock
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
DS18B20 temperature measurement sensor module
Description
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip.
Pin chip has all the leads, built-in pull-up resistor.
power indicator on the board
Board size: 21 (mm) x10 (mm).
SKU: 241497
Product Code: DS18B20-M35
Availability: In Stock
£4.79
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock
£4.79
Psu Adaptor Molex To 4Pin Motherboard
SKU: 227364
Product Code: ADAPT-20PIN-MOLEX
Availability: In Stock
£4.79
Photoresistor Light Detection Sensor Module
Description
Features:
1. The module has a photosensitive resistance sensor
2. TTL output capable of 15 ma.
3. On-board adjustable potentiometer for adjusting trigger level of light
4. Working voltage…
SKU: 242373
Product Code: PHOTO-RESIST
Availability: In Stock
£4.99
Digispark ATTINY85 Arduino General Purpose Micro USB Development Board
Mini USB Micro Development Board
- Condition: New
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source - 5v or 7-16v (automatic selection)
- On-board 150ma 5V Regu…
SKU: 242375
Product Code: ATTINY85
Availability: In Stock
£5.99
Floppy Drive Cable 34 Pin
Ultra ATA Floppy Round Cables dramatically enhance airflow within the CPU over flat-ribbon-style cables. They offer ideal support for high-end, heat generating applications such as gaming, full-moti…
SKU: 227917
Product Code: FDDCABLE
Availability: In Stock
£5.99
HC-SR501 Passive IR PIR Sensor
This is an easy, simple to use Passive IR sensor - it only needs a single I/O pin on a microcontroller.
Working voltage: 5V to 20V
Output: High: 3.3V, Low: 0V
Detection angle: Approxima…
SKU: 235914
Product Code: HC-SR501
Availability: In Stock
£5.99
USB ISP Programmer for ATMEL ATMega ATTiny 51 AVR SMC Board USBASP Programmer
The USBasp AVR programmer is a USB in-circuit programmer for Atmel AVR microcontrollers.
Features include:
Allows you to read and write the controller's EEPROM, firmware, fuse bits and lock bits
…
SKU: 240898
Product Code: USB-AVR
Availability: In Stock
£5.99
