Generic
BNC Boot
An insulating boot designed for use with crimp-on BNC connectors. Helps protect the cable and connector from damage.
SKU: 227842
Product Code: CPEBOOT
£0.12
RJ45 Cat5E Solid Core Patch Cable Grey (Per Metre)
Description
RJ45 Solid Core Patch Cable
SKU: 227654
Product Code: CONET305S
£0.23
RJ45 Cat5E Multi Core Patch Cable Grey (Per Metre)
Description
Patch Cable
SKU: 227652
Product Code: CPEUTP5M
£0.35
Lmr200/Hdf200 Cable For Making Pig Tails Low Loss 0.5Db Signal Loss At 2.4Ghz Bare Ends Per Meter
Excellent industrial strength shielding (HDF-200) for minimum cable loss
SKU: 227760
Product Code: RG58/1
£1.19
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
£1.19
RG58 Low Loss Cable Cable (Per Metre)
• For indoor / outdoor use
• Extension cable for antennas
• Attenuates signal 3 dB
• FME-Male / FME-Female Connectors
• Requires adapters to use with 9913-equivalent cables
SKU: 227325
Product Code: RG58/1M
£1.19
Low Profile Network Bracket
Low Profile bracket for wired network connection.
SKU: 227505
Product Code: LP-NET
£1.19
RJ45 Male To Female Crossover Cable Convertor
Convert a standard network cable to a crossed cable with this adapter
SKU: 227281
Product Code: CONETR017
£1.80
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
From:
£3.48
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
£3.59
1W High Power LEDs Pure White and Warm White Options
Description
These high power LEDs are ideal for any project needing lots of light.
Available in White, and Warm White, you have different options to suit your needs.
Voltage: 3.2V to 3.6V
…
SKU: 232978
Product Code: LED/1W
From:
£3.99
3W High Power LEDs Pure White and Warm White Options
Description
These high power LEDs are ideal for any project needing lots of light.
Available in White, and Warm White, you have different options to suit your needs.
Voltage: 3.2V to 3.6V
…
SKU: 240944
Product Code: LED/3W
From:
£4.99

In stock only 


Development/Breakout Boards (36)
1-WIRE (1)
















