In stock only 
Development/Breakout Boards (36)
1-WIRE (1)Generic
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
Availability: In Stock 
From:
£0.99
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
Availability: In Stock
£1.19
External Battery holder 4 * AA batteries
Description
BATTERY HOLDER, 4XAA 150MM LEAD
Battery size code:AA
Depth, external:16mm
Length / Height, external:63mm
Width, external:57mm
Cells, No. of:4
Connector type:150mm lead
SKU: 227916
Product Code: YCMOS
Availability: In Stock
£1.19
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
Availability: In Stock
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
315MHz Radio Transmitter and Receiver Modules - Send a serial signal over the air!
These 315MHz Radio Transmitter and Receiver modules are great for sending basic serial signals over the air.
Whenever the DATA input on the transmitter module changes, it transmits the signal to th…
SKU: 236161
Product Code: 315MHzRC
Availability: In Stock
£3.59
CPU Heatsink Compound - Enough For 1 Application
Thermal grease is primarily used in the electronics and computer industries to assist a heatsink to draw heat away from a semiconductor component such as an integrated circuit or transistor .
Thermal…
SKU: 227864
Product Code: Heat-Sink-COMP
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
Availability: In Stock
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
433MHz Radio Transmitter and Receiver Modules - Send a serial signal over the air!
These 315MHz Radio Transmitter and Receiver modules are great for sending basic serial signals over the air.
Whenever the DATA input on the transmitter module changes, it transmits the signal to th…
SKU: 236160
Product Code: 433MHzRC
Availability: In Stock
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
