Show All /
Development/Breakout Boards (36)
1-WIRE (1)Generic
DHT11 Humidity and Temperature Sensor
The DHT11 is a basic, low-cost digital thermometer and humidity sensor that is ideal for use with PICs, Arduinos and other microcontrollers.
3V to 5.5V Power and I/O
2.5mA maximum current draw…
SKU: 235958
Product Code: DHT11
Availability: In Stock 
£3.59
CPU Heatsink Compound - Enough For 1 Application
Thermal grease is primarily used in the electronics and computer industries to assist a heatsink to draw heat away from a semiconductor component such as an integrated circuit or transistor .
Thermal…
SKU: 227864
Product Code: Heat-Sink-COMP
Availability: In Stock
£3.59
75cm SATA Cable With Right Angle Connector To Straight Connector
SKU: 227285
Product Code: SATA/75CM/R
Availability: In Stock
£4.20
3pin To 4pin Molex Case Fan Adapter Converter
Description
Connects a high powered three pin fan to a four pin power supply connector with a separate three pin connector for the RPM signal. Great for retaining RPM monitoring capabilities on high …
SKU: 227848
Product Code: FANCASE3P-4PCONV
Availability: In Stock
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
DS18B20 temperature measurement sensor module
Description
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip.
Pin chip has all the leads, built-in pull-up resistor.
power indicator on the board
Board size: 21 (mm) x10 (mm).
SKU: 241497
Product Code: DS18B20-M35
Availability: In Stock
£4.79
4 Pin Motherboard Power Extension
4pin 12V ATX plug - 4pin ATX jack
Designed to extend the 4 pin 12V power supply between the mains adaptor and the motherboard
Uses high quality components
SKU: 227191
Product Code: 4PIN-4PINEXT
Availability: In Stock
£4.79
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock
£4.79
Psu Adaptor Molex To 4Pin Motherboard
SKU: 227364
Product Code: ADAPT-20PIN-MOLEX
Availability: In Stock
£4.79
Photoresistor Light Detection Sensor Module
Description
Features:
1. The module has a photosensitive resistance sensor
2. TTL output capable of 15 ma.
3. On-board adjustable potentiometer for adjusting trigger level of light
4. Working voltage…
SKU: 242373
Product Code: PHOTO-RESIST
Availability: In Stock
£4.99
XL6009 DC-DC Step Down Voltage Regulator Board 3V to 32V INPUT - 5V to 35V OUTPUT
Description
The XL6009 regulator is a wide input range DC to DC step-up converter. The high quality components provide a conversion efficiency of up to 94%.
IN-: Input Negative
IN+: Input Posit…
SKU: 235952
Product Code: XL6009 DC-DC Voltage Step Up Converter
Availability: In Stock
£5.99
ESP8266 ESP-01 WIFI Wireless Transceiver Send Receive LWIP AP+STA M70
Description
Wi-fi Transiever Specs:
WIFI Wireless Transceiver Module
Supports 3 modes: AP,STA,AP+STA
802.11 b/g/n
High quality module
High efficiency AT commands, simple for your de…
SKU: 241486
Product Code: ESP-8266
Availability: In Stock
£5.99
Floppy Drive Cable 34 Pin
Ultra ATA Floppy Round Cables dramatically enhance airflow within the CPU over flat-ribbon-style cables. They offer ideal support for high-end, heat generating applications such as gaming, full-moti…
SKU: 227917
Product Code: FDDCABLE
Availability: In Stock
£5.99
