Show All /
Batteries (3)
1-WIRE (1)Generic
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock 
£1.19
External Battery holder 4 * AA batteries
Description
BATTERY HOLDER, 4XAA 150MM LEAD
Battery size code:AA
Depth, external:16mm
Length / Height, external:63mm
Width, external:57mm
Cells, No. of:4
Connector type:150mm lead
SKU: 227916
Product Code: YCMOS
Availability: In Stock
£1.19
Quartz Crystals - 32.768kHz to 20MHz
These high quality crystal oscillators can be used any time you need accurate timing or an oscillator in a circuit!
We sell several popular frequencies in easy-to-use packages:
Frequ…
SKU: 236238
Product Code: Crystal
Availability: In Stock
From:
£1.68
Cr2032 Cmos Battery
Description
BUTTON CELL, LITH 2032 3V
Battery size code:2032
Diameter, body:20mm
Length / Height, external:3.2mm
Voltage, output:3V
Capacity, energy storage:230mAh
Techn…
SKU: 227362
Product Code: YCMOSCR2032
Availability: In Stock
£1.80
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
CPU Heatsink Compound - Enough For 1 Application
Thermal grease is primarily used in the electronics and computer industries to assist a heatsink to draw heat away from a semiconductor component such as an integrated circuit or transistor .
Thermal…
SKU: 227864
Product Code: Heat-Sink-COMP
Availability: In Stock
£3.59
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
Availability: In Stock
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
CR2025 Cmos Battery
Description
Battery size code:2025; Diameter, body:20mm; Length / Height, external:2.5mm; Voltage, output:3V; Capacity, energy storage:170mAh; Technology, Battery:Lithium;
SKU: 227361
Product Code: YCMOSCR2025
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
