Show All /
Development/Breakout Boards (36)
1-WIRE (1)Generic
BNC Boot
An insulating boot designed for use with crimp-on BNC connectors. Helps protect the cable and connector from damage.
SKU: 227842
Product Code: CPEBOOT
Availability: In Stock 
£0.12
Dual-in-Line IC socket - 20 pin, 0.3" pitch, DIP
These high-quality IC sockets are ideal for use in projects that would otherwise require soldering chips directly on to a printed circuit board or stripboard.
These sockets allow you to avoid d…
SKU: 232994
Product Code: DILSOCKET/0.3/20
Availability: In Stock
From:
£0.99
Dual-in-Line IC socket - 18 pin, 0.3" pitch, DIP
These high-quality IC sockets are ideal for use in projects that would otherwise require soldering chips directly on to a printed circuit board or stripboard.
These sockets allow you to avoid d…
SKU: 232993
Product Code: DILSOCKET/0.3/18
Availability: In Stock
From:
£0.99
Dual-in-Line IC socket - 40 pin, 0.6" pitch, DIP
These high-quality IC sockets are ideal for use in projects that would otherwise require soldering chips directly on to a printed circuit board or stripboard.
These sockets allow you to avoid d…
SKU: 232995
Product Code: DILSOCKET/0.6/40
Availability: In Stock
From:
£0.99
RG58 Low Loss Cable Cable (Per Metre)
• For indoor / outdoor use
• Extension cable for antennas
• Attenuates signal 3 dB
• FME-Male / FME-Female Connectors
• Requires adapters to use with 9913-equivalent cables
SKU: 227325
Product Code: RG58/1M
Availability: In Stock
£1.19
DIY Prototype Project PCB Universal Development Board 5×7 cm
Features:
1. For point to point DIY soldering
2. Material: Single Side Copper PCB
3. Hole Diameter: about 1mm
4. Hole pitch: standard 2.54mm
5. Dimension: 5x7 cm
SKU: 242398
Product Code: DIY-PCB
Availability: In Stock
£1.19
Set of 4 CD/DVD Marker Pens - 2 Blue, 1 Red, 1 Black - Extra Fine tip
These high-quality marker pens are specifically designed for writing on compact disc.
The ink is water based and non-toxic.
SKU: 227961
Product Code: CD/DVD-MARKER
Availability: In Stock
£2.39
JoyStick Breakout Module
Description
100% brand new and high quality.
PS2 joystick standard interface module electronic building blocks and 2.54mm pin interface leads.
Has a two-way rocker 10K Variable resistor.
Spring …
SKU: 242374
Product Code: PS2-JOYSTICK
Availability: In Stock
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
Availability: In Stock
From:
£3.48
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
3.5inch To 5.25inch Hard Drive Mounting Converter
Description
MOUNTING RAILS
SKU: 227338
Product Code: SHKIT
Availability: In Stock
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
1W High Power LEDs Pure White and Warm White Options
Description
These high power LEDs are ideal for any project needing lots of light.
Available in White, and Warm White, you have different options to suit your needs.
Voltage: 3.2V to 3.6V
…
SKU: 232978
Product Code: LED/1W
Availability: In Stock
From:
£3.99
3W High Power LEDs Pure White and Warm White Options
Description
These high power LEDs are ideal for any project needing lots of light.
Available in White, and Warm White, you have different options to suit your needs.
Voltage: 3.2V to 3.6V
…
SKU: 240944
Product Code: LED/3W
Availability: In Stock
From:
£4.99
