Generic
Light Dependent Resistor LDR
Description
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease i…
SKU: 236248
Product Code: LDR
£0.60
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
From:
£0.99
SMD Surface Mount 1206 Series Resistors
The 1206 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors can be…
SKU: 237975
Product Code: RESISTOR/SMD/1206
From:
£0.99
SMD Surface Mount 0805 Series Resistors
The 0805 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors ca…
SKU: 233942
Product Code: RESISTOR/SMD/0805
From:
£0.99
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
£1.19
MAX232EPE MAX232N MAX232 RS232 5V RS-232 Dual Transmitters/Receivers DIP 16 Pin
RS-232 Dual Transmitters/Receivers, Maxim Integrated Products
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface.
M…
SKU: 242392
Product Code: MAX232
£1.19
PCB Supports With Adhesive Base
These PCB supports will allow the mounting of a PCB directly on to the chassis. It will allow the panels, and particularly the printed circuit board to be insulated from one another. The structure use…
SKU: 249919
Product Code: SPU-6
£1.19
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
From:
£1.49
10 to 6 Pin Adapter for ATMEL AVRISP USBASP
Description
For the AVRISP USBASP STK500 programmer standard interface to standard 6PIN 10PIN Interface Converter
AVR MCU development board can be used to download interface converter
The ISP interfa…
SKU: 241480
Product Code: 10-6/PIN
£3.59
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
£3.59
PP3 Battery Box - with 15cm leads
Description
Our high quality plastic PP3 battery box is great for any project needing easily changeable 9V power.
The robust plastic construction protects the battery once it has been inserted, and …
SKU: 238212
Product Code: PP3 Battery Box
£3.59
Solderless Breadboard - 400 tie points
This high quality 400 tie-point Solderless Breadboard consists of 300 terminal strip tie-points connected vertically and 100 tie-points in power rails at the top and bottom of the board connected hori…
SKU: 236240
Product Code: BREADBOARD-400
£3.59
65x Jumper Leads Various Colours - ideal for breadboard use
Approximately 65 solderless breadboard jumper leads of various lengths - ideal for use in prototyping projects on breadboards!
These leads are flexible, durable and easy to connect and disconne…
SKU: 234313
Product Code: JUMPERS
£3.59
Dupont Cables - 20cm 40 way ribbon cables Female and Male options available
Brand new 200mm long 40-way DuPont ribbon cable with individual connectors - available in the following variations:
Male to Male
Male to Female
Female to Female
The male pins are ideal …
SKU: 236241
Product Code: Dupont Cable
From:
£3.99
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
£4.79

Show All /



Breadboards and Accessories (8)
1-WIRE (1)
















