Generic
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
From:
£3.48
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
£3.59
10 to 6 Pin Adapter for ATMEL AVRISP USBASP
Description
For the AVRISP USBASP STK500 programmer standard interface to standard 6PIN 10PIN Interface Converter
AVR MCU development board can be used to download interface converter
The ISP interfa…
SKU: 241480
Product Code: 10-6/PIN
£3.59
Psu Adapter 24Pin ATX Psu To 20Pin Motherboard
Description
ATX 20-pin to ATX 24-pin 12V V.2.0 PSU adapter cable, 10cm.
SKU: 227919
Product Code: ADAPT24-20PIN
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
£3.59
75cm SATA Cable With Right Angle Connector To Straight Connector
SKU: 227285
Product Code: SATA/75CM/R
£4.20
3pin To 4pin Molex Case Fan Adapter Converter
Description
Connects a high powered three pin fan to a four pin power supply connector with a separate three pin connector for the RPM signal. Great for retaining RPM monitoring capabilities on high …
SKU: 227848
Product Code: FANCASE3P-4PCONV
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
£4.79
4 Pin Motherboard Power Extension
4pin 12V ATX plug - 4pin ATX jack
Designed to extend the 4 pin 12V power supply between the mains adaptor and the motherboard
Uses high quality components
SKU: 227191
Product Code: 4PIN-4PINEXT
£4.79