Show All /
Controller Cards (9)
1-WIRE (1)Generic
BNC Boot
An insulating boot designed for use with crimp-on BNC connectors. Helps protect the cable and connector from damage.
SKU: 227842
Product Code: CPEBOOT
Availability: In Stock 
£0.12
RG58 Low Loss Cable Cable (Per Metre)
• For indoor / outdoor use
• Extension cable for antennas
• Attenuates signal 3 dB
• FME-Male / FME-Female Connectors
• Requires adapters to use with 9913-equivalent cables
SKU: 227325
Product Code: RG58/1M
Availability: In Stock
£1.19
Fan Screws (Pack Of 4)
Standard short screws for mounting case fans or attaching fan guards. 4.9 x 10.5mm.
SKU: 227851
Product Code: FAN/SCREWS
Availability: In Stock
£2.39
Female DC Power Connector
Ideal for self-terminating power cables for CCTV installations.
SKU: 235901
Product Code: SEC-CON-PWR-F
Availability: In Stock
£4.79
Male DC Power Connector
Ideal for self-terminating power cables for CCTV installations.
SKU: 235902
Product Code: SEC-CON-PWR-M
Availability: In Stock
£4.79
3pin To 4pin Molex Case Fan Adapter Converter
Description
Connects a high powered three pin fan to a four pin power supply connector with a separate three pin connector for the RPM signal. Great for retaining RPM monitoring capabilities on high …
SKU: 227848
Product Code: FANCASE3P-4PCONV
Availability: In Stock
£4.79
MAX7219CNG MAX7219 DIP-24 Driver LED Display Common Cathode can drive upto 64 Leds
Description
Product Features:
A 24 pin IC, which can drive up to 64 separate LED segments, for example 8 X 7 segment display or 8 X 8 dot matrix in common cathode configuration.
10MHz S…
SKU: 242390
Product Code: MAX7219DIP
Availability: In Stock
£4.99
MAX7219-SMD Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219-SMD LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single mod…
SKU: 240952
Product Code: Mattrix64SMD
Availability: In Stock
From:
£7.19
MAX7219-DIP Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219 LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single module can dri…
SKU: 240951
Product Code: Mattrix64DIP
Availability: In Stock
From:
£7.19
Cardbus Adapter 4 Port USB Type A Ports
Features:
Data Transfer Rate: USB 1.1 OHC1 1.5Mbps, 12Mbps USB 2.0 EHC1 480Mbps
Supports 32-bit Cardbus type II slot
Fully backward compatible to USB 1.1
Supports up to 127 devices
…
SKU: 227400
Product Code: PCMCIA-4PORT
Availability: In Stock
£7.19
Cardbus Adapter 2 Port USB Type A Ports And 2 Port Firewire
Bandwidth
Data transfer rate (max)
400Mbit/s
Supported data transfer rates
100/200/400Mbps
Connectivity
Connectivity technology
Wired
Interface type
CardBus
System requirements
…
SKU: 227398
Product Code: LFE2000-USB-31194
Availability: In Stock
£8.39
Video And Power Cable 15M
Combined 25M video signal and power cable for use with most CCTV cameras.
The cable is pre-made - one end has a BNC connector and power socket, the other end has a matching BNC connector and power…
SKU: 235899
Product Code: BNC+POWER/15M
Availability: In Stock
£9.59
9 Way CCTV Camera Power Splitter
Suitable for splitting 1 power adapter to power up to 9 different devices.
Please check that your power adapter can provide sufficient current to power all of the attached devices.
SKU: 235904
Product Code: SEC-SPL-9WAY
Availability: In Stock
£9.59
PCI Card With 2 Internal SATA And 1 IDE Also Has 1 External SATA Port
Description
• 2 SATA Ports Internal, 1 SATA on Bracket (supports 1int+1ext ot 2int)
• 1 Ultra ATA-133/IDE Interface
• Supports Serial ATA Specifications 1.0 compliance
• Supports ATAPI, CDROM, DVD-R…
SKU: 227689
Product Code: PCI/SATA/IDE
Availability: In Stock
£11.99
Video And Power Cable 18M
Combined 25M video signal and power cable for use with most CCTV cameras.
The cable is pre-made - one end has a BNC connector and power socket, the other end has a matching BNC connector and power…
SKU: 235900
Product Code: BNC+POWER/18M
Availability: In Stock
£14.39
