In stock only 
LED Matrix (3)
1-WIRE (1)Generic
BNC Boot
An insulating boot designed for use with crimp-on BNC connectors. Helps protect the cable and connector from damage.
SKU: 227842
Product Code: CPEBOOT
Availability: In Stock 
£0.12
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
Availability: In Stock
From:
£0.99
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
Availability: In Stock
£1.19
RG58 Low Loss Cable Cable (Per Metre)
• For indoor / outdoor use
• Extension cable for antennas
• Attenuates signal 3 dB
• FME-Male / FME-Female Connectors
• Requires adapters to use with 9913-equivalent cables
SKU: 227325
Product Code: RG58/1M
Availability: In Stock
£1.19
PP3 Battery Box - with 15cm leads
Description
Our high quality plastic PP3 battery box is great for any project needing easily changeable 9V power.
The robust plastic construction protects the battery once it has been inserted, and …
SKU: 238212
Product Code: PP3 Battery Box
Availability: In Stock
£3.59
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
Availability: In Stock
£3.59
Male DC Power Connector
Ideal for self-terminating power cables for CCTV installations.
SKU: 235902
Product Code: SEC-CON-PWR-M
Availability: In Stock
£4.79
Female DC Power Connector
Ideal for self-terminating power cables for CCTV installations.
SKU: 235901
Product Code: SEC-CON-PWR-F
Availability: In Stock
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
MAX7219CNG MAX7219 DIP-24 Driver LED Display Common Cathode can drive upto 64 Leds
Description
Product Features:
A 24 pin IC, which can drive up to 64 separate LED segments, for example 8 X 7 segment display or 8 X 8 dot matrix in common cathode configuration.
10MHz S…
SKU: 242390
Product Code: MAX7219DIP
Availability: In Stock
£4.99
XL6009 DC-DC Step Down Voltage Regulator Board 3V to 32V INPUT - 5V to 35V OUTPUT
Description
The XL6009 regulator is a wide input range DC to DC step-up converter. The high quality components provide a conversion efficiency of up to 94%.
IN-: Input Negative
IN+: Input Posit…
SKU: 235952
Product Code: XL6009 DC-DC Voltage Step Up Converter
Availability: In Stock
£5.99
Solderless Breadboard Power Supply - 3.3V and 5V - DC Jack and USB connector, the easy way to get power to your breadboard
Description
Please note: Breadboard is not included.
This ingenious Solderless Breadboard Power Supply slots into the power rails of our MB-102 breadboard and can provide independent 5V and 3.3V pow…
SKU: 234314
Product Code: BREADBOARD-PSU
Availability: In Stock
£5.99
LM2596HVS DC-DC Step Down Voltage Regulator Board 4.5V to 45V INPUT - 1.2V to 30V OUTPUT
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-sink). This D…
SKU: 235915
Product Code: LM2596HVS-BOARD
Availability: In Stock
£7.19
MAX7219-DIP Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219 LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single module can dri…
SKU: 240951
Product Code: Mattrix64DIP
Availability: In Stock
From:
£7.19
MAX7219-SMD Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219-SMD LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single mod…
SKU: 240952
Product Code: Mattrix64SMD
Availability: In Stock
From:
£7.19
