Generic
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
£3.59
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
£4.79
DS18B20 temperature measurement sensor module
Description
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip.
Pin chip has all the leads, built-in pull-up resistor.
power indicator on the board
Board size: 21 (mm) x10 (mm).
SKU: 241497
Product Code: DS18B20-M35
£4.79
MAX7219CNG MAX7219 DIP-24 Driver LED Display Common Cathode can drive upto 64 Leds
Description
Product Features:
A 24 pin IC, which can drive up to 64 separate LED segments, for example 8 X 7 segment display or 8 X 8 dot matrix in common cathode configuration.
10MHz S…
SKU: 242390
Product Code: MAX7219DIP
£4.99
Photoresistor Light Detection Sensor Module
Description
Features:
1. The module has a photosensitive resistance sensor
2. TTL output capable of 15 ma.
3. On-board adjustable potentiometer for adjusting trigger level of light
4. Working voltage…
SKU: 242373
Product Code: PHOTO-RESIST
£4.99
4cm/40Mm Case Fan 4 Wire Molex Connector
Dimension
40 x 40 x 11 mm
Voltage
5V
12V
24V
0.07A
Fan Speed
L
Middle
H
HH
5000
5500
6000
6500
Bearing Type
Sleeve
1 Ball
2 Ball
EL
V
SKU: 227183
Product Code: FAN/CASE/4CM
£5.99
MMA7455 Digital Accelerometer - 3 axis - I2C/SPI interface
The MMA7455 accelerometer breakout board provides a MMA7455 accelerometer and the associated circuitry.
Connecting this module to your microcontroller is easy with the SPI/I2C output - producin…
SKU: 232998
Product Code: MMA7455/BREAKOUT
£5.99
6cm/60Mm Case Fan 4 Wire Molex Connector
Dimension
: 60 x 60 x 25 mm
Voltage
5V
12V
24V
0.12A
Fan Speed
LL
L
M
H
HH
TH
3200
3600
4000
4400
4800
5200
Bearing Type
Sleeve
1 Ball
2 Ball
EL…
SKU: 227184
Product Code: FAN/CASE/6CM/4W
£5.99
SD Secure Digital Storage Shield Module Board Card Memory SPI Interface
Description
Description
This breakout board allows you to connect SD cards to a microcontroller! Smaller cards such as microSD cards can be connected with an adapter (not supplied). This breakout bo…
SKU: 233004
Product Code: SD/BREAKOUT
£5.99
Solderless Breadboard Power Supply - 3.3V and 5V - DC Jack and USB connector, the easy way to get power to your breadboard
Description
Please note: Breadboard is not included.
This ingenious Solderless Breadboard Power Supply slots into the power rails of our MB-102 breadboard and can provide independent 5V and 3.3V pow…
SKU: 234314
Product Code: BREADBOARD-PSU
£5.99
5cm Case Fan 3Wire
50 x 10mm, lo-noise, 12v, 3-pin, sleeve bearing, medium speed.
SKU: 227849
Product Code: FANCASE5CM3W
£5.99
Digispark ATTINY85 Arduino General Purpose Micro USB Development Board
Mini USB Micro Development Board
- Condition: New
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source - 5v or 7-16v (automatic selection)
- On-board 150ma 5V Regu…
SKU: 242375
Product Code: ATTINY85
£5.99