In stock only 
Controller Cards (7)
1-WIRE (1)Generic
IC 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
8-BIt Serial-in, Parallel-Out Shift
Wide Operating Voltage Range of 2 V to 6 V
High-Current 3-State Outputs Can Drive Up To 15 LSTTL Loads
Low Power Consumption, 80-UA Max icc
Typical tpd =…
SKU: 241498
Product Code: 74HC595-DIP-16
Availability: In Stock 
£0.60
ATMEL ATMEGA88PA-PU MCU 8BIT 8KB FLASH DIP 28 Pin
Product Details
ADC Channels
6
ADC Resolution
10bit
ADCs
6 x 10 bit
Data Bus Width
8bit
…
SKU: 242391
Product Code: ATMEGA88PA-PU
Availability: In Stock
£3.59
MAX7219CNG MAX7219 DIP-24 Driver LED Display Common Cathode can drive upto 64 Leds
Description
Product Features:
A 24 pin IC, which can drive up to 64 separate LED segments, for example 8 X 7 segment display or 8 X 8 dot matrix in common cathode configuration.
10MHz S…
SKU: 242390
Product Code: MAX7219DIP
Availability: In Stock
£4.99
Module I2C Serial Interface Board Module LCD1602 Address Changeable
Alphanumeric LCD to I2C Adaptor
The LCD1602 I2C interface board is designed to make it easy to connect any HD44780-based display to your microcontroller over I2C.
The long header connector (with pin…
SKU: 240946
Product Code: LCD1602
Availability: In Stock
£5.99
USB ISP Programmer for ATMEL ATMega ATTiny 51 AVR SMC Board USBASP Programmer
The USBasp AVR programmer is a USB in-circuit programmer for Atmel AVR microcontrollers.
Features include:
Allows you to read and write the controller's EEPROM, firmware, fuse bits and lock bits
…
SKU: 240898
Product Code: USB-AVR
Availability: In Stock
£5.99
MAX7219-DIP Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219 LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single module can dri…
SKU: 240951
Product Code: Mattrix64DIP
Availability: In Stock
From:
£7.19
MAX7219-SMD Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219-SMD LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single mod…
SKU: 240952
Product Code: Mattrix64SMD
Availability: In Stock
From:
£7.19
Cardbus Adapter 4 Port USB Type A Ports
Features:
Data Transfer Rate: USB 1.1 OHC1 1.5Mbps, 12Mbps USB 2.0 EHC1 480Mbps
Supports 32-bit Cardbus type II slot
Fully backward compatible to USB 1.1
Supports up to 127 devices
…
SKU: 227400
Product Code: PCMCIA-4PORT
Availability: In Stock
£7.19
Cardbus Adapter 2 Port USB Type A Ports And 2 Port Firewire
Bandwidth
Data transfer rate (max)
400Mbit/s
Supported data transfer rates
100/200/400Mbps
Connectivity
Connectivity technology
Wired
Interface type
CardBus
System requirements
…
SKU: 227398
Product Code: LFE2000-USB-31194
Availability: In Stock
£8.39
Arduino ATmega328 Pro Mini Compatible Development Board
This board is compatible with the Arduino Pro Mini board - it is a Arduino board intended for advanced users who need flexibility, low cost and tiny size. The minimum of components are included - no o…
SKU: 237929
Product Code: Pro Mini
Availability: In Stock
£8.39
PCI Card With 2 Internal SATA And 1 IDE Also Has 1 External SATA Port
Description
• 2 SATA Ports Internal, 1 SATA on Bracket (supports 1int+1ext ot 2int)
• 1 Ultra ATA-133/IDE Interface
• Supports Serial ATA Specifications 1.0 compliance
• Supports ATAPI, CDROM, DVD-R…
SKU: 227689
Product Code: PCI/SATA/IDE
Availability: In Stock
£11.99
K150 USB PIC Programmer Essential for uploading your compiled HEX file
This item is a USB PIC Programmer ideal for both hobbyists and more serious developers.
This programmer can program chips in the ZIF (Zero Insertion Force) socket, and it can also be used as an In…
SKU: 236155
Product Code: K150 PIC Programmer
Availability: In Stock
£13.19
DCcduino ATmega328 Arduino Uno R3 compatible Board
Description
The DCcduino Uno is a microcontroller board based on the ATmega328 and compatible with the Arduino Uno R3. It has 14 digital I/O pins, 6 analog inputs, a 16MHz crystal oscillator, a USB…
SKU: 238346
Product Code: DCcduino Uno
Availability: In Stock
£14.39
Pcmcia Controller For PCI Slot
Introduction Now you can install any PCMCIA adapter card into your existing PC or Server with the new low cost PCI-PCMCIA adapter from Dynamode.
Featuring a full size PCMCIA Slot (Type I, Type II &…
SKU: 227394
Product Code: PCI-PCMCIA
Availability: In Stock
£23.99
PCI 1 Port Parallel Controller Card
Description
Need to connect to legacy Parallel Port devices such as Printers but don’t have a Parallel Port on your existing PC or Server?
The new PCI-PARALLEL is a fully featured 1-Port full speed …
SKU: 227369
Product Code: 1PARCARD
Availability: In Stock
£23.99
