Show All /
Homeplug 200MBps Wireless Ethernet Adapter With Wireless N and 2 ethernet ports
Description
The Solwise PL-200AV-PEW-N is a Homeplug Wireless N Extender, using the new Intellon 200Mbps AV solution that transforms your in-house power circuit into a networking infrastructure and a WLAN connection. It's ideal for anyone wishing to extend their wireless signal coverage for Internet access or to make a local area network(LAN).
Built-in Quality of Service (QOS) for homeplug also provides the necessary bandwidth for multimedia payloads including Broadband TV (IPTV), higher data rate broadband sharing, Online-Gaming, VoIP Calls, Wireless LANs coverage, Audio-Video transmission across the network as well as Network camera connectivity.
Key Features:
IEEE 802.11b/g/n Wireless specifications
Data transfer rate up to 300Mbps via wireless
Wireless on/off switch for power saving
128-bit DES Encryption security support for powerline & WEP, WPA, WPA2 for wireless
Apply for printer and peripheral sharing, HD Video Streaming, Voice over IP calls and Online games7. External Connectors :
- 2 x RJ45 for 10/100 Ethernet (AutoMDI/MDIX)
- 1 x Reset Button
- 1 x Push button for both WPS and SimpleConnect
1 Network cable included.
Remember, you will need at least two HomePlug devices to form a HomePlug connection. More HomePlug AV devices can be added to further share your network.
| Standards |
HomePlug® AV Wireless: IEEE 802.11b/g/n Ethernet: IEEE 802.3, Auto MDI/MDIX |
|---|---|
| Protocols |
CSMA/CA over Powerline Wireless: CSMA/CA,EDCA |
| Data Transfer Rate |
200Mbps over Powerline 300Mbps via Wireless |
| Modulation |
Powerline: OFDM 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO Wireless: CCK,BPSK,DQPSK, QPSK, QAM |
| Security |
Powerline: 128-bit AES encryption (enabled with Simple Connect button) Wireless: WEP, WPA, WPA2 |
| Indicator LEDs |
1 x Power 1 x PowerLine Link/ACT 1 x Ethernet Link/ACT 1 x Wireless Link/Act |
| External Interfaces |
1 x Electrical Power Plug 2 x RJ45 for 10/100 Ethernet (AutoMDI/MDIX) 1 x Reset Button 1 x Push button for both WPS and SimpleConnect |
| Dimensions |
Plug : 105(H) X 58(W) X 42(D)mm Packing Box: 14 x 18 x 8 cm |
| Weight | 180g |
| Power Consumption | 6.8W, 0.12A |
| Temperature |
(-)25° to 70° C 0° to 40° C |
| Environment |
30% to 80% Humidity (Non-Condensing) |
| Others |
Powerline: Intellon INT6400 HomePlug AV Chipset Wireless: Ralink RT3052 Wireless N Chipset Power Supply: AC 100 ~240V, 50~60Hz |
The contents of the CD (including the setup utility for Windows PCs) can be downloaded here: Download CD Contents
There is a firmware upgrade available that allows you to set the Wireless Security settings via the web browser: Download Firmware Upgrade Download Wireless Security How-to
Specification
| Ports | 2 x RJ-45 |
| Transfer Rate | 200Mbps |
| Wireless | Built in Wireless N |
