Show All /
ATMEGA8 ATMEGA48 ATMEGA88 Development Board AVR (NO Chip) DIY Kit
Description
Description
Features:
-
Supply voltage: This can be provided via the USB socket or via the pins. THE SUPPLY VOLTAGE AND THE OPERATING VOLTAGE OF THE CHIP MUST BE THE SAME
-
Crystal: 8MHz
-
PCB board size: 7.4cm x 3.4cm;
-
Note: This is a DIY kit, components are supplied loose for self assembly, you will need to solder the components yourself.
Placement of the components are marked on the PCB see below for capacitor placement. -
Alternatively you can select the assembled option, we will then solder all the components for you.
NO DOCUMENTATION IS SUPPLIED -
Package contains:
PCB board x1
28pin Zif Socket x1
USB female x1
2x5pin connector x1
self-locking switch x1
40pin Sil Header x1
8MHz crystal x1
22pf (22) ceramic capacitors x2 (to be soldered adjacent to the crystal)
100nf (104) ceramic capacitors x2 (to be soldered adjacent to the 10k resistor and between PC0 and PB7)
3mm LED x2
Reset switch x1
4.7K resistor x2
10K resistor x1
All components will be double checked for quantity and value prior to shipping.
