In stock only 
Sma Male Connector For RG58 Cable
£3.59
Description
The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 " hex nut. It is important that the nut be properly torqued with a 5/16 " wrench, 3-5 in·lbf (0.3 to 0.6 N·m) for brass, and 7-10 in·lbf (0.8–1.1 N·m) for stainless steel connectors. When turning the nut, it is very important that the remainder of the connector does not rotate, otherwise premature wear of the connector will result. Furthermore, the connector should be carefully inspected before each use, and any debris cleaned with compressed air. When properly handled, a SMA connector should remain within specified performance through 500 mating cycles.
