In stock only 
5mm LEDs (7)
1-WIRE (1)Generic
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock 
£4.79
DS18B20 temperature measurement sensor module
Description
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip.
Pin chip has all the leads, built-in pull-up resistor.
power indicator on the board
Board size: 21 (mm) x10 (mm).
SKU: 241497
Product Code: DS18B20-M35
Availability: In Stock
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
Resistors for use with LEDs - 3.3V, 5V, 6V, 9V, 12V - 100 pack
These high quality resistors are suitable for use with LEDs - simply choose the voltage you want to power your LED from and the correct resistors will be supplied.
The resistors supplied are based …
SKU: 238041
Product Code: LED Resistors
Availability: In Stock
£4.99
Photoresistor Light Detection Sensor Module
Description
Features:
1. The module has a photosensitive resistance sensor
2. TTL output capable of 15 ma.
3. On-board adjustable potentiometer for adjusting trigger level of light
4. Working voltage…
SKU: 242373
Product Code: PHOTO-RESIST
Availability: In Stock
£4.99
512MB Multimedia Card
512MB Multimedia Card
SKU: 228003
Product Code: MMC512
Availability: In Stock
£5.98
ENC28J60 Ethernet Breakout Board for use with Microcontrollers
This is a ENC28J60-based ethernet development board for use with microprocessors such as PICs or AVRs.
Fully pre-populated board - ready to use!
10Mbit ethernet controller to provide fast n…
SKU: 232997
Product Code: ENC28J60/BREAKOUT
Availability: In Stock
£5.99
Micro SD Mini TF Storage Shield Module Board Card Memory SPI Interface
Description
Features:
Micro SD / mini TF card module with SPI interface card reader
The is a Micro SD card reader module, with a SPI interface driver, SCM system to complete the file to read and wr…
SKU: 242393
Product Code: MSD-MINI
Availability: In Stock
£5.99
HC-SR04 Ultrasound Proximity Sensor
Description
Description
This high-quality ultrasound sensor is ideal for use for distance measuring and proximity sensing.
A simple 4 pin connector makes this product very easy to add to your proje…
SKU: 236242
Product Code: HC-SR04
Availability: In Stock
£5.99
Polypropylene Liquid Water Level Sensor Right Angle Horizontal Float Switch
A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.
The output wires are 'Closed Circuit' when …
SKU: 242400
Product Code: LIQUID-RIGHTANGLE-SENSOR
Availability: In Stock
£5.99
MMA7455 Digital Accelerometer - 3 axis - I2C/SPI interface
The MMA7455 accelerometer breakout board provides a MMA7455 accelerometer and the associated circuitry.
Connecting this module to your microcontroller is easy with the SPI/I2C output - producin…
SKU: 232998
Product Code: MMA7455/BREAKOUT
Availability: In Stock
£5.99
Arduino ATmega328 3.0 Nano Compatible Module with new onboard CH340 USB
Product Specs:
CH340G Replace FT232RL
Operating Voltage（logic level）：5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10,…
SKU: 242394
Product Code: NANO328-CH340
Availability: In Stock
£5.99
ATMEGA8 ATMEGA48 ATMEGA88 Development Board AVR (NO Chip) DIY Kit
Description
Features:
Supply voltage: This can be provided via the USB socket or via the pins. THE SUPPLY VOLTAGE AND THE OPERATING VOLTAGE OF THE CHIP MUST BE THE SAME
Crystal:…
SKU: 242502
Product Code: ATMEGA-DEV-KIT
Availability: In Stock
£5.99
USB ISP Programmer for ATMEL ATMega ATTiny 51 AVR SMC Board USBASP Programmer
The USBasp AVR programmer is a USB in-circuit programmer for Atmel AVR microcontrollers.
Features include:
Allows you to read and write the controller's EEPROM, firmware, fuse bits and lock bits
…
SKU: 240898
Product Code: USB-AVR
Availability: In Stock
£5.99
SD Secure Digital Storage Shield Module Board Card Memory SPI Interface
Description
Description
This breakout board allows you to connect SD cards to a microcontroller! Smaller cards such as microSD cards can be connected with an adapter (not supplied). This breakout bo…
SKU: 233004
Product Code: SD/BREAKOUT
Availability: In Stock
£5.99
