Generic
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
£4.79
Resistors for use with LEDs - 3.3V, 5V, 6V, 9V, 12V - 100 pack
These high quality resistors are suitable for use with LEDs - simply choose the voltage you want to power your LED from and the correct resistors will be supplied.
The resistors supplied are based …
SKU: 238041
Product Code: LED Resistors
£4.99
600 piece Resistor Pack - 30 different values - 20 of each value
These resistors come in strips of 20 for each resistor value so you can easily separate them - they are not in one mixed bag.
This is a pack of 600 high quality metal-film resistors rated at 0.25W co…
SKU: 236243
Product Code: Resistor Pack
£5.99
MMA7455 Digital Accelerometer - 3 axis - I2C/SPI interface
The MMA7455 accelerometer breakout board provides a MMA7455 accelerometer and the associated circuitry.
Connecting this module to your microcontroller is easy with the SPI/I2C output - producin…
SKU: 232998
Product Code: MMA7455/BREAKOUT
£5.99
SD Secure Digital Storage Shield Module Board Card Memory SPI Interface
Description
Description
This breakout board allows you to connect SD cards to a microcontroller! Smaller cards such as microSD cards can be connected with an adapter (not supplied). This breakout bo…
SKU: 233004
Product Code: SD/BREAKOUT
£5.99
Solderless Breadboard Power Supply - 3.3V and 5V - DC Jack and USB connector, the easy way to get power to your breadboard
Description
Please note: Breadboard is not included.
This ingenious Solderless Breadboard Power Supply slots into the power rails of our MB-102 breadboard and can provide independent 5V and 3.3V pow…
SKU: 234314
Product Code: BREADBOARD-PSU
£5.99
Digispark ATTINY85 Arduino General Purpose Micro USB Development Board
Mini USB Micro Development Board
- Condition: New
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source - 5v or 7-16v (automatic selection)
- On-board 150ma 5V Regu…
SKU: 242375
Product Code: ATTINY85
£5.99
HC-SR501 Passive IR PIR Sensor
This is an easy, simple to use Passive IR sensor - it only needs a single I/O pin on a microcontroller.
Working voltage: 5V to 20V
Output: High: 3.3V, Low: 0V
Detection angle: Approxima…
SKU: 235914
Product Code: HC-SR501
£5.99
USB ISP Programmer for ATMEL ATMega ATTiny 51 AVR SMC Board USBASP Programmer
The USBasp AVR programmer is a USB in-circuit programmer for Atmel AVR microcontrollers.
Features include:
Allows you to read and write the controller's EEPROM, firmware, fuse bits and lock bits
…
SKU: 240898
Product Code: USB-AVR
£5.99
Micro SD Mini TF Storage Shield Module Board Card Memory SPI Interface
Description
Features:
Micro SD / mini TF card module with SPI interface card reader
The is a Micro SD card reader module, with a SPI interface driver, SCM system to complete the file to read and wr…
SKU: 242393
Product Code: MSD-MINI
£5.99
DS1307 Tiny RTC - Real time clock breakout board
Description
The Tiny RTC real time clock breakout board provides a Maxim DS1307 Real Time Clock - including a battery holder and a battery - and an Atmel 24C32 EEPROM.
It can optionally also have a …
SKU: 230592
Product Code: TINY-RTC
£5.99
Arduino ATmega328 3.0 Nano Compatible Module with new onboard CH340 USB
Product Specs:
CH340G Replace FT232RL
Operating Voltage(logic level):5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10,…
SKU: 242394
Product Code: NANO328-CH340
£5.99
ATMEGA8 ATMEGA48 ATMEGA88 Development Board AVR (NO Chip) DIY Kit
Description
Features:
Supply voltage: This can be provided via the USB socket or via the pins. THE SUPPLY VOLTAGE AND THE OPERATING VOLTAGE OF THE CHIP MUST BE THE SAME
Crystal:…
SKU: 242502
Product Code: ATMEGA-DEV-KIT
£5.99