Show All /
Controller Cards (9)
1-WIRE (1)Generic
DHT11 Humidity and Temperature Sensor
The DHT11 is a basic, low-cost digital thermometer and humidity sensor that is ideal for use with PICs, Arduinos and other microcontrollers.
3V to 5.5V Power and I/O
2.5mA maximum current draw…
SKU: 235958
Product Code: DHT11
Availability: In Stock 
£3.59
CPU Heatsink Compound - Enough For 1 Application
Thermal grease is primarily used in the electronics and computer industries to assist a heatsink to draw heat away from a semiconductor component such as an integrated circuit or transistor .
Thermal…
SKU: 227864
Product Code: Heat-Sink-COMP
Availability: In Stock
£3.59
75cm SATA Cable With Right Angle Connector To Straight Connector
SKU: 227285
Product Code: SATA/75CM/R
Availability: In Stock
£4.20
Psu Adaptor Molex To 4Pin Motherboard
SKU: 227364
Product Code: ADAPT-20PIN-MOLEX
Availability: In Stock
£4.79
3pin To 4pin Molex Case Fan Adapter Converter
Description
Connects a high powered three pin fan to a four pin power supply connector with a separate three pin connector for the RPM signal. Great for retaining RPM monitoring capabilities on high …
SKU: 227848
Product Code: FANCASE3P-4PCONV
Availability: In Stock
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
Availability: In Stock
£4.79
DS18B20 temperature measurement sensor module
Description
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip.
Pin chip has all the leads, built-in pull-up resistor.
power indicator on the board
Board size: 21 (mm) x10 (mm).
SKU: 241497
Product Code: DS18B20-M35
Availability: In Stock
£4.79
4 Pin Motherboard Power Extension
4pin 12V ATX plug - 4pin ATX jack
Designed to extend the 4 pin 12V power supply between the mains adaptor and the motherboard
Uses high quality components
SKU: 227191
Product Code: 4PIN-4PINEXT
Availability: In Stock
£4.79
DS1302 Clock and Temperature Module - Red LED Display with battery backup
Description
This high quality DS1302-based clock module with Red LED display and battery backup is an ideal way to show time, date or temperature.
Simply connect power to the module's power pins, se…
SKU: 236244
Product Code: DS1302 Clock Module
Availability: In Stock
£4.79
Photoresistor Light Detection Sensor Module
Description
Features:
1. The module has a photosensitive resistance sensor
2. TTL output capable of 15 ma.
3. On-board adjustable potentiometer for adjusting trigger level of light
4. Working voltage…
SKU: 242373
Product Code: PHOTO-RESIST
Availability: In Stock
£4.99
DS1307 Tiny RTC - Real time clock breakout board
Description
The Tiny RTC real time clock breakout board provides a Maxim DS1307 Real Time Clock - including a battery holder and a battery - and an Atmel 24C32 EEPROM.
It can optionally also have a …
SKU: 230592
Product Code: TINY-RTC
Availability: In Stock
£5.99
Arduino ATmega328 3.0 Nano Compatible Module with new onboard CH340 USB
Product Specs:
CH340G Replace FT232RL
Operating Voltage（logic level）：5V
8 analog inputs ports:A0 ~ A7
14 Digital input / output ports:TX,RX,D2 ~ D13
6 PWM ports:D3, D5, D6, D9, D10,…
SKU: 242394
Product Code: NANO328-CH340
Availability: In Stock
£5.99
ATMEGA8 ATMEGA48 ATMEGA88 Development Board AVR (NO Chip) DIY Kit
Description
Features:
Supply voltage: This can be provided via the USB socket or via the pins. THE SUPPLY VOLTAGE AND THE OPERATING VOLTAGE OF THE CHIP MUST BE THE SAME
Crystal:…
SKU: 242502
Product Code: ATMEGA-DEV-KIT
Availability: In Stock
£5.99
