Generic
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
From:
£1.49
KY-040 Rotary Encoder Module Sensor
Rotary encoder module 360 module coding Module
Note: This module does not provide technical support
Operating voltage: 5V
Circle pulses: 20
Rotary encoder can count positive by rotation
And rever…
SKU: 242369
Product Code: KY-040
£2.39
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
From:
£3.48
BH1750FVI Digital Light intensity Sensor Module
Description
Description:
chip : BH1750FVI
Power supply: 3v-5V power
Light range :0-65535 lx
Sensor built-in : 16 bitA…
SKU: 242366
Product Code: BH1750FVI
£3.59
Matrix Keypad - 16 Tactile Switches
Our tactile keypad provides 16 keys on a PCB using a matrix system wired to an 8 pin SIL header.
The PCB provides a hard surface to press against allowing the switches to be easily pressed and provid…
SKU: 237925
Product Code: KEYPAD/TACTILE
£3.59
Membrane Keypad - 16 button 4 x 4 matrix keypad
Our membrane keypad provides 16 keys on an 8-pin connector using a matrix system to detect which key has been pressed.
The matrix keypad is wired via a flexible ribbon to an 8 pin header socket.
The…
SKU: 237978
Product Code: KP/MB/4x4
£3.59
Membrane Keypad - 12 button 3 x 4 matrix keypad
Our membrane keypad provides 12 keys on a 7-pin connector using a matrix system to detect which key has been pressed.
The matrix keypad is wired via a flexible ribbon to an 7 pin header socket.
…
SKU: 240948
Product Code: KP/MB/3x4
£3.59
DHT11 Humidity and Temperature Sensor
The DHT11 is a basic, low-cost digital thermometer and humidity sensor that is ideal for use with PICs, Arduinos and other microcontrollers.
3V to 5.5V Power and I/O
2.5mA maximum current draw…
SKU: 235958
Product Code: DHT11
£3.59
Membrane Keypad - 4 button 1 x 4 matrix keypad
Description
Our membrane keypad provides 4 keys on an 5-pin connector using a matrix system to detect which key has been pressed.
The matrix keypad is wired via a flexible ribbon to an 8 pin header …
SKU: 241424
Product Code: KP/MB/1x4
From:
£3.59
Yellow Ultrasonic Sensor Fixed Bracket for HC-SR04 Module
100% Brand new and high quality
Lightweight and durable, easy to match the ultrasonic sensor
Material: Acrylic
Color: Yellow
Thickness: approx. 2.8-3.1 mm
Comes with adhesive backing and screws f…
SKU: 242364
Product Code: HC-SR04-BRACKET
£3.59
5mm RGB Colour Flashing LEDs 2 Pin Slow Flash or Slow/Fast Flash - Various Pack Sizes Available to save you money !
These are 5mm 4-pin RGB (Red, Green, Blue) LEDs. These LEDs are available as common cathode or common anode - select the type you require above.
Please note our LEDs have clear, colourless plas…
SKU: 235908
Product Code: LED/5MM/FLASH
From:
£3.99
5mm RGB Colour LEDs 4 Pin Common Anode or Common Cathode - Various Pack Sizes Available to save you money !
These are 5mm 4-pin RGB (Red, Green, Blue) LEDs. These LEDs are available as common cathode or common anode - select the type you require above.
Please note these LEDs have clear, colourless pl…
SKU: 232962
Product Code: LEDS3
From:
£3.99
DS18B20 temperature measurement sensor module
Description
Board DS18B20 chip left 3P hole seat easily accessible DS18B20 chip.
Pin chip has all the leads, built-in pull-up resistor.
power indicator on the board
Board size: 21 (mm) x10 (mm).
SKU: 241497
Product Code: DS18B20-M35
£4.79
TTP224 4-Channel Digital Touch Sensor Module Capacitive Touch Switch M61
TTP224 4-way switch digital touch sensor module
4 key pad TTP224 capacitive touch sensor IC
Onboard 4-level status indicator
Operating voltage: 2.4V-5.5V
Module can set t…
SKU: 241487
Product Code: TTP-224
£4.79
Resistors for use with LEDs - 3.3V, 5V, 6V, 9V, 12V - 100 pack
These high quality resistors are suitable for use with LEDs - simply choose the voltage you want to power your LED from and the correct resistors will be supplied.
The resistors supplied are based …
SKU: 238041
Product Code: LED Resistors
£4.99