Generic
Ceramic Capacitors - 50V DC - 50 pack (3.3pF to 100nF)
This is a selection of capacitors in values starting at 3.3pF up to 100nF.
The 3.3pF to 1nF values are 2.5mm capacitors, the 2.2nF to 100nF values are 5mm capacitors.
These capacitors are s…
SKU: 230606
Product Code: CAP/MULTILAYER-CERAMIC
From:
£0.49
Light Dependent Resistor LDR
Description
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease i…
SKU: 236248
Product Code: LDR
£0.60
SMD Surface Mount 0805 Series Resistors
The 0805 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors ca…
SKU: 233942
Product Code: RESISTOR/SMD/0805
From:
£0.99
SMD Surface Mount 1206 Series Resistors
The 1206 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors can be…
SKU: 237975
Product Code: RESISTOR/SMD/1206
From:
£0.99
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
From:
£0.99
MAX232EPE MAX232N MAX232 RS232 5V RS-232 Dual Transmitters/Receivers DIP 16 Pin
RS-232 Dual Transmitters/Receivers, Maxim Integrated Products
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface.
M…
SKU: 242392
Product Code: MAX232
£1.19
Lmr200/Hdf200 Cable For Making Pig Tails Low Loss 0.5Db Signal Loss At 2.4Ghz Bare Ends Per Meter
Excellent industrial strength shielding (HDF-200) for minimum cable loss
SKU: 227760
Product Code: RG58/1
£1.19
Low Profile Network Bracket
Low Profile bracket for wired network connection.
SKU: 227505
Product Code: LP-NET
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
£1.19
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
From:
£1.49
PP3 Battery Box - with 15cm leads
Description
Our high quality plastic PP3 battery box is great for any project needing easily changeable 9V power.
The robust plastic construction protects the battery once it has been inserted, and …
SKU: 238212
Product Code: PP3 Battery Box
£3.59
10 to 6 Pin Adapter for ATMEL AVRISP USBASP
Description
For the AVRISP USBASP STK500 programmer standard interface to standard 6PIN 10PIN Interface Converter
AVR MCU development board can be used to download interface converter
The ISP interfa…
SKU: 241480
Product Code: 10-6/PIN
£3.59
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
£3.59
Sma Male Connector For RG58 Cable
The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 " hex nut. It is important that the nut be properly torqued with a 5/16 " wrench, 3-5 in·lbf (0.3 to 0.6 N·m) for bras…
SKU: 227770
Product Code: SMA-PLUG-RG58
£3.59
Sma Female To Sma Female Adaptor Coupler
SMA Socket Female to SMA Socket Female
Barrel Adaptor
SKU: 227769
Product Code: SMA-F/BARREL
£4.79

Show All /



Ceramic Capacitors (2)
1-WIRE (1)
















