Generic
IC2262/2272 Wireless Radio Remote Control - 4 buttons Transmitter and Receiver Kit
The IC2262/2272 Wireless Remote Control and receiver is a great and simple way of providing basic remote control to your projects!
With four buttons, the remote can be used for a variety of actions. …
SKU: 238039
Product Code: IC2262/2272 Wireless Remote Control
£5.99
ATMEGA8 ATMEGA48 ATMEGA88 Development Board AVR (NO Chip) DIY Kit
Description
Features:
Supply voltage: This can be provided via the USB socket or via the pins. THE SUPPLY VOLTAGE AND THE OPERATING VOLTAGE OF THE CHIP MUST BE THE SAME
Crystal:…
SKU: 242502
Product Code: ATMEGA-DEV-KIT
£5.99
HC-SR501 Passive IR PIR Sensor
This is an easy, simple to use Passive IR sensor - it only needs a single I/O pin on a microcontroller.
Working voltage: 5V to 20V
Output: High: 3.3V, Low: 0V
Detection angle: Approxima…
SKU: 235914
Product Code: HC-SR501
£5.99
USB ISP Programmer for ATMEL ATMega ATTiny 51 AVR SMC Board USBASP Programmer
The USBasp AVR programmer is a USB in-circuit programmer for Atmel AVR microcontrollers.
Features include:
Allows you to read and write the controller's EEPROM, firmware, fuse bits and lock bits
…
SKU: 240898
Product Code: USB-AVR
£5.99
Micro SD Mini TF Storage Shield Module Board Card Memory SPI Interface
Description
Features:
Micro SD / mini TF card module with SPI interface card reader
The is a Micro SD card reader module, with a SPI interface driver, SCM system to complete the file to read and wr…
SKU: 242393
Product Code: MSD-MINI
£5.99
Solderless Breadboard Power Supply - 3.3V and 5V - DC Jack and USB connector, the easy way to get power to your breadboard
Description
Please note: Breadboard is not included.
This ingenious Solderless Breadboard Power Supply slots into the power rails of our MB-102 breadboard and can provide independent 5V and 3.3V pow…
SKU: 234314
Product Code: BREADBOARD-PSU
£5.99
Digispark ATTINY85 Arduino General Purpose Micro USB Development Board
Mini USB Micro Development Board
- Condition: New
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source - 5v or 7-16v (automatic selection)
- On-board 150ma 5V Regu…
SKU: 242375
Product Code: ATTINY85
£5.99
XL6009 DC-DC Step Down Voltage Regulator Board 3V to 32V INPUT - 5V to 35V OUTPUT
Description
The XL6009 regulator is a wide input range DC to DC step-up converter. The high quality components provide a conversion efficiency of up to 94%.
IN-: Input Negative
IN+: Input Posit…
SKU: 235952
Product Code: XL6009 DC-DC Voltage Step Up Converter
£5.99
SD Secure Digital Storage Shield Module Board Card Memory SPI Interface
Description
Description
This breakout board allows you to connect SD cards to a microcontroller! Smaller cards such as microSD cards can be connected with an adapter (not supplied). This breakout bo…
SKU: 233004
Product Code: SD/BREAKOUT
£5.99
ESP8266 ESP-01 WIFI Wireless Transceiver Send Receive LWIP AP+STA M70
Description
Wi-fi Transiever Specs:
WIFI Wireless Transceiver Module
Supports 3 modes: AP,STA,AP+STA
802.11 b/g/n
High quality module
High efficiency AT commands, simple for your de…
SKU: 241486
Product Code: ESP-8266
£5.99
MMA7455 Digital Accelerometer - 3 axis - I2C/SPI interface
The MMA7455 accelerometer breakout board provides a MMA7455 accelerometer and the associated circuitry.
Connecting this module to your microcontroller is easy with the SPI/I2C output - producin…
SKU: 232998
Product Code: MMA7455/BREAKOUT
£5.99
ENC28J60 Ethernet Breakout Board for use with Microcontrollers
This is a ENC28J60-based ethernet development board for use with microprocessors such as PICs or AVRs.
Fully pre-populated board - ready to use!
10Mbit ethernet controller to provide fast n…
SKU: 232997
Product Code: ENC28J60/BREAKOUT
£5.99
Infrared Remote Control module Kit HX1838 NEC Code VS1838B Receiver
Description
Description
This high quality infra-red sensor works on the common 38kHz frequency - allowing it to work with common home remote controls! We include a remote control with the sensor for…
SKU: 236159
Product Code: VS1838B
£6.99
MAX7219-SMD Dot Matrix Module 8 * 8 LED Display
Description
Brand New High Quality Module
Uses the MAX7219-SMD LED Display Driver
Size:50mmx32mmx15mm/1.95"x1.25"x0.58"(inch) (approx)
Module operating voltage: 4.7v to 5V
A single mod…
SKU: 240952
Product Code: Mattrix64SMD
From:
£7.19
LM2596HVS DC-DC Step Down Voltage Regulator Board 4.5V to 45V INPUT - 1.2V to 30V OUTPUT
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-sink). This D…
SKU: 235915
Product Code: LM2596HVS-BOARD
£7.19