Generic
BMP085 Barometric Pressure and Temperature Sensor - 3.3V and 5V
The BMP085 low-power, high-precision barometric pressure sensors can measure between 300 to 1100hPa with an accuracy of approximately 0.03hPA in high-resolution mode.
Our breakout board gives you e…
SKU: 235911
Product Code: BMP085
From:
£3.48
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector
Small passive infra-red detector
Automatic sensing: By entering into the sensing range the output will go high, when there is no activity the output will automatically go low after a delay …
SKU: 244591
Product Code: HC-SR505
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
£3.59
Psu Adapter 24Pin ATX Psu To 20Pin Motherboard
Description
ATX 20-pin to ATX 24-pin 12V V.2.0 PSU adapter cable, 10cm.
SKU: 227919
Product Code: ADAPT24-20PIN
£3.59
Sma Male Connector For RG58 Cable
The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 " hex nut. It is important that the nut be properly torqued with a 5/16 " wrench, 3-5 in·lbf (0.3 to 0.6 N·m) for bras…
SKU: 227770
Product Code: SMA-PLUG-RG58
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
£3.59
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
£3.59
75cm SATA Cable With Right Angle Connector To Straight Connector
SKU: 227285
Product Code: SATA/75CM/R
£4.20
4 Pin Motherboard Power Extension
4pin 12V ATX plug - 4pin ATX jack
Designed to extend the 4 pin 12V power supply between the mains adaptor and the motherboard
Uses high quality components
SKU: 227191
Product Code: 4PIN-4PINEXT
£4.79
LM2596 DC-DC Step Down Voltage Regulator Board 4.5V to 35V INPUT - 1.2V to 30V OUTPUT
Description
Description
The LM2596-based step down voltage regulator board is a low-ripple adjustable output voltage power supply capable of providing up to 2A of continuous current (3A with a heat-…
SKU: 232966
Product Code: LM2596-BOARD
£4.79
Tnc Female To Sma Male Adapter
Convert From (Adapter End)
SMA Plug, Male Pin
Convert To (Adapter End)
TNC Jack, Female Socket
Features
-
Style
Straight
Mounting Type
Free Hanging (In-Line)
Lead F…
SKU: 227774
Product Code: ADAPT-REVTNC-PLUG-REVSMA-SOCKET
£4.79
Tnc Female Connector For RG58 Cable
The TNC (threaded Neill-Concelman) connector is a threaded version of the BNC connector. The connector has a 50 Ω impedance and operates best in the 0–11 GHz frequency spectrum. It has better performa…
SKU: 227773
Product Code: TNC-REV-PLUG-RG58
£4.79
3pin To 4pin Molex Case Fan Adapter Converter
Description
Connects a high powered three pin fan to a four pin power supply connector with a separate three pin connector for the RPM signal. Great for retaining RPM monitoring capabilities on high …
SKU: 227848
Product Code: FANCASE3P-4PCONV
£4.79