Show All /
Case Accessories (3)
1-WIRE (1)Generic
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
Availability: In Stock 
From:
£0.99
85Mm Led Tube - Red
85mm red LED Tube light
SKU: 227073
Product Code: CT-RED
Availability: In Stock
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
Availability: In Stock
£1.19
Lmr200/Hdf200 Cable For Making Pig Tails Low Loss 0.5Db Signal Loss At 2.4Ghz Bare Ends Per Meter
Excellent industrial strength shielding (HDF-200) for minimum cable loss
SKU: 227760
Product Code: RG58/1
Availability: In Stock
£1.19
External Battery holder 4 * AA batteries
Description
BATTERY HOLDER, 4XAA 150MM LEAD
Battery size code:AA
Depth, external:16mm
Length / Height, external:63mm
Width, external:57mm
Cells, No. of:4
Connector type:150mm lead
SKU: 227916
Product Code: YCMOS
Availability: In Stock
£1.19
Low Profile Network Bracket
Low Profile bracket for wired network connection.
SKU: 227505
Product Code: LP-NET
Availability: In Stock
£1.19
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
CPU Heatsink Compound - Enough For 1 Application
Thermal grease is primarily used in the electronics and computer industries to assist a heatsink to draw heat away from a semiconductor component such as an integrated circuit or transistor .
Thermal…
SKU: 227864
Product Code: Heat-Sink-COMP
Availability: In Stock
£3.59
PP3 Battery Box - with 15cm leads
Description
Our high quality plastic PP3 battery box is great for any project needing easily changeable 9V power.
The robust plastic construction protects the battery once it has been inserted, and …
SKU: 238212
Product Code: PP3 Battery Box
Availability: In Stock
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
3.5inch To 5.25inch Hard Drive Mounting Converter
Description
MOUNTING RAILS
SKU: 227338
Product Code: SHKIT
Availability: In Stock
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
Sma Male Connector For RG58 Cable
The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 " hex nut. It is important that the nut be properly torqued with a 5/16 " wrench, 3-5 in·lbf (0.3 to 0.6 N·m) for bras…
SKU: 227770
Product Code: SMA-PLUG-RG58
Availability: In Stock
£3.59
5V DC Relay Modules - switch up to 230V AC or 30V DC - 1, 2, 4 and 8 way
These high quality 5V DC Relay modules allow for easy switching of higher voltages and are ideal for use with a microcontroller such as a PIC, Arduino, ARM or AVR.
The relays used in these modules …
SKU: 235913
Product Code: RELAY/5V/DC
Availability: In Stock
From:
£4.99
