In stock only 
ESP8266 (7)
1-WIRE (1)Generic
Light Dependent Resistor LDR
Description
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease i…
SKU: 236248
Product Code: LDR
Availability: In Stock 
£0.60
SMD Surface Mount 0805 Series Resistors
The 0805 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors ca…
SKU: 233942
Product Code: RESISTOR/SMD/0805
Availability: In Stock
From:
£0.99
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
Availability: In Stock
From:
£0.99
SMD Surface Mount 1206 Series Resistors
The 1206 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors can be…
SKU: 237975
Product Code: RESISTOR/SMD/1206
Availability: In Stock
From:
£0.99
Lmr200/Hdf200 Cable For Making Pig Tails Low Loss 0.5Db Signal Loss At 2.4Ghz Bare Ends Per Meter
Excellent industrial strength shielding (HDF-200) for minimum cable loss
SKU: 227760
Product Code: RG58/1
Availability: In Stock
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
Availability: In Stock
£1.19
External Battery holder 4 * AA batteries
Description
BATTERY HOLDER, 4XAA 150MM LEAD
Battery size code:AA
Depth, external:16mm
Length / Height, external:63mm
Width, external:57mm
Cells, No. of:4
Connector type:150mm lead
SKU: 227916
Product Code: YCMOS
Availability: In Stock
£1.19
Low Profile Network Bracket
Low Profile bracket for wired network connection.
SKU: 227505
Product Code: LP-NET
Availability: In Stock
£1.19
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball…
SKU: 240959
Product Code: SW520D
Availability: In Stock
From:
£1.49
ESP8266 Serial WIFI Module Adapter Plate for use with ESP-07 ESP-08 ESP-12
Description
ESP8266 Serial Wireless WIFI Module Adapter Plate.
This is an Adapter Plate is used to solder YOUR ESP-07, ESP-08 or ESP-12 module.
No ESP modules are supplied. Please see ESP8266…
SKU: 242583
Product Code: ESP8266-Plate
Availability: In Stock
£3.59
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
Availability: In Stock
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
Availability: In Stock
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
Availability: In Stock
£3.59
Sma Male Connector For RG58 Cable
The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 " hex nut. It is important that the nut be properly torqued with a 5/16 " wrench, 3-5 in·lbf (0.3 to 0.6 N·m) for bras…
SKU: 227770
Product Code: SMA-PLUG-RG58
Availability: In Stock
£3.59
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
Availability: In Stock
£3.59
