Generic
2N2097A PNP Transistor
The 2N2907A is a versatile transistor ideal for many uses.
Absolute Maximum Ratings
These ratings are at an ambient temperature of 25°C, unless otherwise stated.
Symbol
De…
SKU: 238213
Product Code: 2N2097A
From:
£0.99
BC327 PNP Transistor
The BC327 is a transistor ideally suited to Audio Frequency driver stages and low-power output stages. It is also the ideal complement to the BC337 transistor.
Absolute Maximum Ratings
Thes…
SKU: 233000
Product Code: BC327
From:
£0.99
BC337 NPN Transistor
The BC337 is a transistor ideally suited to Audio Frequency driver stages and low-power output stages. It is also the ideal complement to the BC327 transistor.
Absolute Maximum Ratings
Thes…
SKU: 233001
Product Code: BC337
From:
£0.99
BC547 NPN Transistor
The BC547 is a transistor ideally suited for switching use. It is also the ideal complement to the BC556 to BC560 transistors.
Absolute Maximum Ratings
These ratings are at an ambient temperatur…
SKU: 233002
Product Code: BC547
From:
£0.99
PP3 Battery Clip making it easy to power your project
This high-quality PP3 battery clip will fit any standard PP3 battery connector and has 100mm leads suitable for soldering!
SKU: 233003
Product Code: PP3CLIP
From:
£0.99
2N2222 NPN Transistor
The 2N2222 General Purpose Transistor is an NPN transistor that is incredibly versatile and ideal for many uses.
Absolute Maximum Ratings
These ratings are at an ambient temperature of 25°C…
SKU: 232999
Product Code: 2N2222
£1.19
Lmr200/Hdf200 Cable For Making Pig Tails Low Loss 0.5Db Signal Loss At 2.4Ghz Bare Ends Per Meter
Excellent industrial strength shielding (HDF-200) for minimum cable loss
SKU: 227760
Product Code: RG58/1
£1.19
Low Profile Network Bracket
Low Profile bracket for wired network connection.
SKU: 227505
Product Code: LP-NET
£1.19
External Battery holder 4 * AA batteries
Description
BATTERY HOLDER, 4XAA 150MM LEAD
Battery size code:AA
Depth, external:16mm
Length / Height, external:63mm
Width, external:57mm
Cells, No. of:4
Connector type:150mm lead
SKU: 227916
Product Code: YCMOS
£1.19
CR2032 2032 CMOS Battery holder
CMOS 2032 battery holder, ideal for soldering to most motherboards in which the current battery holder has been damaged or your projects which need powering from a CMOS CR2032 battery
Easy to solde…
SKU: 242396
Product Code: CR2032-HOLDER
£1.19
0.9-5V Input to 5V Output 600mA USB Charger DC-DC Converter Step Up Boost Module
Specifications:
Product Name
Step Up Boost Module
Input Voltage
0.9 to 5V
Output
5V, 600mA
Size
33 x 18 x 10mm/ 1.3" x…
SKU: 242395
Product Code: USBCHARGER
£3.59
Micro USB DIP Adapter Converter 5pin for 2.54mm PCB Breakout Board Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242368
Product Code: MICROUSB-DIP-5PIN
£3.59
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 3.3v - 5v
Description
Connects a 3.3V device to a 5V system
Steps down 5V signals to 3.3V AND steps up 3.3V to 5V simultaneously
This level converter also works with 2.8V and 1.8V devices.
Sets high and l…
SKU: 242371
Product Code: IIC-I2C-Logic
£3.59
Sma Male Connector For RG58 Cable
The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 " hex nut. It is important that the nut be properly torqued with a 5/16 " wrench, 3-5 in·lbf (0.3 to 0.6 N·m) for bras…
SKU: 227770
Product Code: SMA-PLUG-RG58
£3.59
USB to DIP Adapter Converter 4pin for 2.54mm PCB Breakout Board DIY Power Supply
Features:
The USB to DIP 5pin 2.54mm PCB Board for DIY Power Supply and USB projects.
This module is used as a breakout board from a standard USB port to a conventional DIP2.54mm pin
…
SKU: 242363
Product Code: USB-DIP-4PIN
£3.59

Show All /



Motherboard Accessories (6)
1-WIRE (1)
















